These steps walk you through from start to finish to get your Range BOOTH setup and ready to be used at your next event.

As always, if you have any issues, feel free to start a conversation with our client success team for help! 

Gently place the BOOTH head unit down on a smooth, flat surface to avoid any possible scratches. 

Using a Phillips head screw, remove the screws, 8 total, from the units backplate.

Once you remove all the screws, lift the backplate off and lay it down next to the unit, be careful not to unplug any of the wires inside the unit.

Unscrew the 8 wingnuts to detach the faceplate from the head unit.

Lift the unit straight up, leaving the faceplate in place.

Install the iPad by sliding the tablet facedown into the metal sleeve on the back of the faceplate, making sure the iPad is pushed entirely down.

Gently place the head unit back onto the faceplate by lining up the faceplate’s threads with the corresponding holes.

Reinstall all 8 of the wingnuts, tightening them in a star pattern.

Using the charge block and USB cable provided, plug in your iPad to the universal outlet to allow the iPad to charge when the unit is plugged in and powered on.

Place the backplate onto the unit, lining up the corresponding holes and reinstall in the screws in the star pattern used in Step 5.